Welcome to the IPFire Wiki

This wiki is a community-maintained resource about everything there is to know about IPFire. Join us and help us improving it!

Looking for something?

Use the search and find answers to everything about IPFire. If you cannot find what you are looking for, join our community and talk to fellow IPFire users, developers and everybody else involved in the project.

IPFire Community

Differences in Revisions: Step 3: Run the installer

Older Revision
July 30 at 3:19 pm
»
update paths for 2 images
# Step 3: Run the installer
 
*This step is only required if you are booting the installation system from a disk image. Those who flashed an image onto a compact flash drive or similar can skip this step and go directly to [](step4).*
 
After you inserted the disk or plugged in the pen drive you install from, you will need to make the system boot from it.
 
![](bootsplash.png)
![](/installation/bootsplash.png)
 
Press enter to run the installation system. If your computer does not support VGA or you prefer an other installation option, you can pick that from the menu.
 
 
## Language Selection
 
After the installer system has booted you will need to select a language that you want to use for the installation.
 
![](language-selection.png)
 
 
## Welcome
 
When the system has finished booting up, please choose your language and confirm the welcome message.
 
![](welcome.png)
 
 
## Partitioning and Formatting
 
In the next step, the system will format your disk in order to install the IPFire system on it. **Beware that all your data will be erased from the system.** If you have only one harddrive this will automatically be used for the installation. If you have more than one harddrive plugged in, you can select which one should be used to install IPFire on.
 
![](confirm-harddisk.png)
 
After selecting the right harddrive you will need to select the filesystem you want to use. If you are not sure, stick with the default.
 
 
### Filesystem options
 
IPFire can be installed on various filesystems. They all have their advantages and disadvantages.
 
| Filesystem | Remark |
| --- | --- |
| ext4 | The standard filesystem for Linux machines. Well tested and stable. |
| ext4 without journal | The same like ext4 but does not use a journal for filesystem transaction. This will write less data to disk but will lose data when not shut down correctly. Don't use this unless you know exactly what you are doing. |
| XFS | A robust server filesystem. |
| reiserfs | Very similar approach to ext4 and very well tested, too. |
 
![](filesystem-selection.png)
 
 
## Installation
 
The installer will start partitioning and formatting your harddrive and install the IPFire system on it. Depending on the size of the harddrive and the speed of your system this will take a moment.
 
![](installation-progress.png)
![](/installation/installation-progress.png)
 
 
## Done
 
![](done.png)
 
After the installation process has been finished you will need to reboot and go on with the next step: [](step4).