IPFire is a versatile firewall distribution that is also running on the ARM architecture. However, the ARM architecture is very much different from x86 hardware that many people are used to. This section on the IPFire wiki takes care about which hardware is supported.
Before buying the first ARM single board computer, please take a moment to find out which one is actually supported by IPFire. Note that ARM support is difficult to handle and very fragile. It may require at least some advanced skills with IPFire and/or Linux.
There are some problems which are affecting all ARM boards. Most of them are bugs which are known to the developers, but require special effort to be fixed or cannot be eliminated for another reason.
Some ARM boards (not all, but some of them) have a hardware-based random number generator (HWRNG). IPFire neither recognizes nor uses them at the moment; in addition to that, they don't appear in the list of supported HWRNGs.
Only the Raspberry Pi has an HWRNG which is used and recognized at the moment. For further details, please see the individual descriptions of the ARM boards.
|██||CompuLab Utilite||Missing bootloader & kernel support|
|██||Friendly Elec NanoPi R1|
|██||dreamplug||wlan/bluetooth not work w/ IPFire 2.21|
|██||Globalscale Mirabox||Not sure if IPFire 2.21 will work|
|██||Lamobo R1 aka BananaPi Router|
|██||Raspberry Pi (One) B and B+|
|██||Raspberry Pi 2 Model B|
|██||Raspberry Pi 3 Model B|
|██||Raspberry Pi 3 Model B+|
|██||Raspberry Pi 4 Model B||IPFire forum - Raspberry Pi 4|
|██||BananaPi M1||Sinoviop has mfg the boards for LeMaker|
|██||ClearFog Base / Pro||Needs extra u-boot & u-boot env settings.|
|██||ClearFog Pro||Should work like ClearFog Base - no reports|
|██||CuBox-i||No working bootloader.|
|██||Hummingboard||No working bootloader.|
|██||Wandboard Solo||HWRNG not supported yet.|
|██||Wandboard Dual||WLAN, Bluetooth & HWRNG not supported|
|██||Wandboard Quad||WLAN, Bluetooth & HWRNG not supported|
There is a mailing list which is the first place to contact other people working on the ARM port of IPFire or being interested in supporting that at: email@example.com