Differences in Revisions: Raidsonic ICY-Box 62x0

fix list & code block and removed bad link
# Raidsonic ICY-Box 62x0
 
This box is a cheap (in germany) kirkwood based nas which can used as hardware for IPFire. But you need to add a serial console. http://simon.baatz.info/raidsonic-icy-box-ib-nas6210-my-new-sheevaplug/
This box is a cheap (in germany) kirkwood based nas which can used as hardware for IPFire. But you need to add a serial console.
 
## Technichal data
 
`CPU: Marvell Feroceon 1.2 GHz ARMv5te`
* CPU: Marvell Feroceon 1.2 GHz ARMv5te
`RAM: 256MB 16bit DDR2 @800`
* RAM: 256MB 16bit DDR2 @800
`Storage: 1 (6210) or 2 (6220) SATA Drive Bay(s)`
* Storage: 1 (6210) or 2 (6220) SATA Drive Bay(s)
`1x GigaBit LAN`
* 1x GigaBit LAN
`3x USB 2.0 HiSpeed`
* 3x USB 2.0 HiSpeed
`1x eSATA 2.0 (3Gbit) (only 6210)`
* 1x eSATA 2.0 (3Gbit) (only 6210)
 
## u-boot
 
The icy-box has a outdated u-boot as bootloader. You need to flash an up to date version. (IPFire image ship a working image in /usr/share/u-boot)
 
After flashing you need to add a basic config environment:
 
```
`boot_dev=ide`
boot_dev=ide
`boot_part=0:1`
boot_part=0:1
`bootcmd=${boot_dev} reset; fatload ${boot_dev} ${boot_part} 0x8000000 boot.scr; source 0x8000000;`
bootcmd=${boot_dev} reset; fatload ${boot_dev} ${boot_part} 0x8000000 boot.scr; source 0x8000000;
`bootdelay=3`
bootdelay=3
`console=console=ttyS0,115200 earlyprintk`
console=console=ttyS0,115200 earlyprintk
`fdt_addr_r=0x6300000`
fdt_addr_r=0x6300000
`fdtfile=kirkwood-ib62x0.dtb`
fdtfile=kirkwood-ib62x0.dtb
`kernel_addr_r=0x6400000`
kernel_addr_r=0x6400000
`ramdisk_addr_r=0x6900000`
ramdisk_addr_r=0x6900000
`root_dev=/dev/sda3`
root_dev=/dev/sda3
`soc=kirkwood`
soc=kirkwood
```