Differences in Revisions: Pandaboard

»
fix code blocks
# Pandaboard
 
We are working on a arm-port to run IPFire on Pandaboard.
 
This port is mainly as development and build environment.
 
 
![](/hardware/arm/pandaboard.jpg " ")
 
 
## Technichal data
 
`CPU: TI Omap4 (1000Mhz armv7l) Dual Core`
* CPU: TI Omap4 (1000Mhz armv7l) Dual Core
`RAM: 1GB`
* RAM: 1GB
`Storage: SD/SDHC-Card Slot`
* Storage: SD/SDHC-Card Slot
`1x WLAN/Bluetooth`
* 1x WLAN/Bluetooth
`1x Fast Ethernet LAN`
* 1x Fast Ethernet LAN
`2x USB 2.0 HiSpeed`
* 2x USB 2.0 HiSpeed
`2x HDMI (only one Port is Suppored by IPFire)`
* 2x HDMI (only one Port is Suppored by IPFire)
`2x 3.5mm Audio (in/out) not supported by IPFire`
* 2x 3.5mm Audio (in/out) not supported by IPFire
 
 
## IPFire Images
To use this you need experience with Pandaboard. It is not ready for end-user nor productive use.
Video Output is not supported with IPFire.
 
unpack this to a SD Card with:
 
```
To use this you need experience with Pandaboard. It is not ready for end-user nor productive use.
Video Output is not supported with IPFire
 
unpack this to a SD Card with
 
`xzcat ipfire-2.21.2gb-ext4.armv5tel-full-coreXXX.img.xz > /dev/sd?`
xzcat ipfire-2.21.2gb-ext4.armv5tel-full-coreXXX.img.xz > /dev/sd?
```
 
Ater this put it in you Pandaboard, connect Serial Console and boot it.