Differences in Revisions: LeMaker BananaPro

fix code blocks
# LeMaker BananaPro
 
The Banana Pi Pro is basically a Banana Pi board with additional GPIO ports and a wifi module.
 
## Technical data
 
```
CPU: Allwinner A20 ARM Cortex-A7 Dual-Core
RAM: 1GB
Storage: 1 microSD card slot
1x Gigabit LAN
2. USB 2.0
1x 802.11 b/g/n Wifi
```
 
## How to install IPFire on the Banana Pro
Download the latest armv5tel IPFire image, unpack the Image to a (Micro)SD Card:
 
Download the latest armv5tel IPFire image,
unpack the Image to a (Micro)SD Card
```
xzcat ipfire-2.21.2gb-ext4.armv5tel-full-core122.img.xz > /dev/mmcblk?
# (or /dev/sd? depends on you cardreader)
```
 
xzcat ipfire-2.21.2gb-ext4.armv5tel-full-core122.img.xz > /dev/mmcblk? (or /dev/sd? depends on you cardreader)
Mount the root filesystem (3 Partition) and go to `usr/share/u-boot/banana_pi` folder and run:
 
Mount the root filesystem (3 Partition) and go to usr/share/u-boot/banana_pi folder and run
```
dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk? bs=1K seek=8
```
 
dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk? bs=1K seek=8
 
Mount the boot filesystem (1 Partition) and edit uENV.txt
Mount the boot filesystem (1 Partition) and edit `uENV.txt`:
 
```
DTBSUNXI=sun7i-a20-bananapro.dtb
 
```
and set SERIAL-CONSOLE to OFF if you want to use HDMI/KEYBOARD instead of serial console.
 
 
### Prepare the serial console
## Prepare the serial console
FIXME to be done, procedure is similar to Banana Pi (different GPIO ports?)
**FIXME** to be done, procedure is similar to Banana Pi (different GPIO ports?)