Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+We are working on a arm-port to run IPFire on Pandaboard.
+This port is mainly as development and build environment.
+===== Pandaboard =====
+{{:en:hardware:arm:pandaboard.jpg|}}
+==== Technichal data  ====
+  CPU: TI Omap4 (1000Mhz armv7l) Dual Core
+  RAM: 1GB
+  Storage: SD/SDHC-Card Slot
+x WLAN/Bluetooth
+x Fast Ethernet LAN
+x USB 2.0 HiSpeed
+x HDMI (only one Port is Suppored by IPFire)
+x 3.5mm Audio (in/out) not supported by IPFire
+==== IPFire Images ====
+To use this you need experience with Pandaboard. It is not ready for end-user nor productive use.
+There are two Images, without "scon" is for use Video output and USB Keyboard or with "scon" for use serial console.
+http://people.ipfire.org/~arne_f/testing/armv5tel/kernel-update/
+unpack this to a SD Card with
+  zcat ipfire-2.11.1gb-ext4.armv5tel-full-coreXX.img.gz > /dev/sd?
+Ater this put it in you Pandaboard, connect the Video and a USB keyboard or Serial Console and boot it. IPFire should boot up and should configured in the same way like the normal version.
+===== Mailinglist =====
+There is a mailinglist development purposes or any other discussion about the ARM project. **Please join.**
+http://lists.ipfire.org/mailman/listinfo/sig-arm

wiki.ipfire.org